600-7100-CPVC Waterway 2 in. TruSeal Diverter 3-Way Valve

TruSeal Diverter 3-Way Valve 2 in. made by Waterway 600-7100-CPVC

• Diverter valve seal is Teflon laminated silicone
• Unique manufacturing process called TruSeal results in a sealthat never needs lubrication
• TruSeal Valves have deeper sockets than other valves providingbetter glue joint bonding
• The exclusive Click and Lock handle has 72 lockingpositions / points for virtually any setting desired
• Exclusive Flow Labels gives your plumbing aprofessional look and more value
• Universal shaft spline pattern adapts to most actuators
• Waterway manufacturers all TruSealDiverter Valves in the USA
• Valve Seal Lifetime Warranty

TRUSEAL TRIGGER LOCK HANDLE USE:

• NOTE: Valve handle must not be removed during use unless a valve actuator isinstalled. To turn handle squeeze trigger and move to desired position.

• OFF INDICATOR:

  • Off area on indicator represents the exact position of theinternal valve diverter seal.

  HANDLE STOPS

  • Protruding stoppers located on valve cover will stop diverterin complete port shut-off position.

  TRUSEAL FLOW INDICATOR TAGS:

  • There are flow indicator tags that can beattached for your convenience, to ensure flow to the designated port. Be suretheINLETtag is positioned on the valve cover over the desired incoming flowport. NOTE: For some installations it may be desirable to permanently glue theflow indicator tags in place. When doing this, remove the lid/valve assemblyfrom the valve body prior to gluing flow indictor tags. When replacing lid/valve assembly hand-tighten screws evenly to ensure correct sealing. DO NOTover-tighten.

  Size:

  • ID : 2 in. Slip(Socket)
  • OD : 2.5 in. Spigot