55-470-1250 Pool Spa Microssage Jet Grill White HydroAir 16-5230

HydroAir Pool and Spa Microssage Jet Grill Flow Path Assembly White 16-5230

TO CONVERT YOUR THERAPY JET TO A MlCRO’SSAGE

1. Make sure the spa pump is not running.
2. Remove the existing laceplate and eyeball by pressing your palm against the front of the jet and rotating approximately 1/8turn counterclockwise.
3. To install the rotating mechanism; insert the flow path into the grill. Be sure the small brown-colored bearing is seated all theway into the grill.DO NOT USE ANY TYPE OF LUBRICATION!
4. lnsert the assembled grill and flow path by lining up the tabs on the wall litting with the slots on the grill. Press in toward thespa wall and rotate l/8 turn clockwise until the grill locks into place.

As with any moving parts, Hydro Air Industries recommends periodic removal and cleaning of the flow path assembly. Four times a year the parts should be removed, wiped off and any debris cleared away.DO NOT USE ALCOHOL or any SOLVENTS or LUBRlCANTS on your Micro’ssage Assembly, as these products may attack the plasticand cause failure.

• Face Diameter : 3-1/2
• Length : 2-3/4
• Color : White
• Material : Plastic