Bio-Dex Filter Cleaner M2000 FCO32
For cartridge, diatomite and sand swimming pool filters.Effectively and quickly removes scale, rust, oils, grease and most soils from filtersNon-carcinogenicImproves filtrationSafe to equipmentEnvironmentally friendlyThe original back-wash type filter cleaner.An Important step in keeping the water clean and clear.Fast acting, effective and economical.
M2000 Filter Cleaner Instructions
Quick Clean Application: Pour the cleaner into the filter while system is on backwash. Continue until the water comes out clean. Filter Cleaner is compatible with cartridge, sand, and diatomite filters. Deep Clean Application: clean filters up to 24” in diameter, mix one quart of Filter Cleaner with five gallons of water. To clean filters from 30” to 36” in diameter, mix two quarts of the cleaner with five gallons of water. To thoroughly clean sand, DE and other like types of filter media, backwash the pool before you begin. Pour the premixed solution into the filter and add water to completely cover the media. Replace the filter top and soak for four to twelve hours. If your pool has a high mineral content, scale or oil buildup, soak the filter overnight. After soaking, backwash until the water runs clear. Start the pump and fill the filter with clean water. Cartridge Soak: remove the cartridges and rinse them with clean water. Place the cartridges into a solution of one quart of Filter Cleaner per ten gallons of clean water in a plastic container. Let the cartridges soak in the solution for at least four hours. After cleaning, rinse with clean water and return the cartridge to the filter. (can soak overnight without damage)
Reviews
There are no reviews yet.