Hayward Phantom Turbo Manifold Gearbox AX6000MA3GA
AX6000MA3GA and AX6000MA3GABK Turbo Manifold Gearbox kit removal Installation Instructions.
- Turn cleaner over so suction inlet is facingupwards and remove 5 screws (N1)
- Turn cleaner back over to sit on its wheelsand carefully remove deck assembly (N2)
- Remove 2 floats (N3) and vactube (N4)
- Remove manifold retaining screw (N5)and lift out manifold / gearbox assy (N6)taking care to disengage gearboxlinkage (N7) from switch assy (N8) in lowerhousing. Lift out lower spinout jet (N9) fromits location with lower housing.
- Remove tank assy (N10)from old manifoldby removing 2 screws (N11)
- Install tank assy (N10) on new manifold andreplace 2 screws (N11).
- Install new manifol Gearbox assy (N6)making sure gearbox switch linkage (N7)engages with switch assembly (N8)Replace front spinout jet (N9) on lowerhousin and replace manifold retainingscrew (N5)
- Replace 2 floats (N3) and vactube (N4)
- Replace deck assembly (N2) , carefullyturn cleaner over so suction inlet facesupwards.
- Replace 5 deck mounting screws (N1)
Maintenance Update Phantom/Viper Turbo Manifold Inlet Filter Screen.Inlet Filter Screen is available as spare part AX6004R1.
- Inlet filter screen stays in manifold inlet when hose is removed for storage.
- If there is debris in the filter it can be removed for cleaning by grasping the bar and gently pulling while twisting.
- Rinse to ensure that all debris and sand is removed from the inlet filter screen.
- Before replacing in manifold, check that there is no debris visible inside of manifold inlet. lf sand or debris can be seen, gently rinse out manifold with inlet pointed down.
Reviews
There are no reviews yet.